Compatible Set up

STEP 1

Start with a clean, empty cartridge.

STEP 2

Open up the cartridge by pulling a thumb tab away from the cartridge and lifting the lid out in the opposite direction.

STEP 3

Remove felt tray and grid from cartridge.

STEP 4

Open up your refill pack and pour into the cartridge.

STEP 5

Wipe inside rim of cartridge to allow clean connection with felt tray.

step 6

Place the felt tray back onto
the cartridge

STEP 7

Take out one carbon felt disk & insert on to felt tray. Once on felt tray, place grid on top of carbon felt.

STEP 8

Fit the lid securely on to the cartridge. Make sure all 6 teeth are showing above the lid.

STEP 9

Soak your compatible cartridge for 6 minutes.

STEP 10

Place the cartridge into the reservoir and fill up. Filter and pour out 2 full reservoirs before consuming

STEP 11

You are now ready to go!

WHAT TO DO IF YOUR CARTRIDGE GETS BLOCKED

Don't worry if your cartridge gets blocked. All you need to do is remove the cartridge from the reservoir, and run the tap onto the bottom of the cartridge. This is due to some of the media getting stuck in the grid.

WHAT TO DO IF YOUR CARTRIDGE GETS BLOCKED

HOW TO TREAT YOUR COMPATIBLE

STILL STRUGGLING?